top of page
Skid Steer Attachment Superstore & Equipment Rental
CALL US NOW! (918)860-6036
Heavy Duty Skid Steer & Tractor Loader Attachments
Creager Equipment is your trusted source for all your skid steer attachment needs. Because we use the products we sell, we can help you find the right attachment for your needs. With 5 locations to serve you better, we have you covered!
Creager Equipment is your authorized dealer for:
-
Jenkins Iron & Steel
-
Montana Post Drivers
-
CL Fabrication
-
Brush Wolf
-
MBW Rollers
-
DoMor Graders
-
Bainter Boomer Trenchers
-
SKEER Systems
-
Hydra Bucket
Check out our current line of commercial grade equipment (click on the image for details and pricing):
Super Duty Brush Mower
The heavy-duty Jenkins Iron & Steel Super Duty Mower is a step up from average brush mowers. Utilizing a direct drive motor, as opposed to the standard gearbox, and a 1/4″ thick free-floating deck, this 4-blade brush mower is ready for any challenge, including trees up to 7″ in diameter.
7' w/push bar - $7,100
6' w/push bar - $6,700
7' w/push bar - $7,100
6' w/push bar - $6,700
Brush Wolf Alpha XP
The Brush Wolf Alpha series is the TOP OF THE FOOD CHAIN in Skid Steer mowers!
BRUSH WOLF ALPHA
We carry 2 models:
Alpha XP Flat Blade -
$19,147
Alpha HD Flat Blade - $19,147
• HD for standard flow (or High flow with lower GPM) skid steers with auxiliary hydraulic flows rated at 23-32 GPM
• XP for high flow skid steers rated at 33-45 GPM.
FEATURES:
• Consistent cutting of heavy brush – capacity to cut trees up to 10” in diameter!
• Hydraulic piston motor for quicker recovery time and less bogging down when accelerating through thick brush
• Massive bearing housing has a 3.25″ shaft diameter and patented locking retention system to provide maximum reliability in the toughest cutting situations.
• Proven blade carrier system provides the performance and inertia to tackle the most demanding jobs.
• Open front and “V-Notch” design allows operator precision when cutting trees and saplings.
• A deflector plate controls discharged material from the front of the deck
• A vented hood shields the drive train and hydraulic connections from impacts and debris.
• Laminated abrasion resistant “AR 400” skid pads provide extended life to the ground engaging skid rails.
• “Clean Deck” design allows material to glide off during operation preventing unwanted buildup of debris.
• Heavy duty spiral hose wrap guards hydraulic hoses to stave off entanglements of branches and keep you moving.
• Three year warranty on the structural steel and 18 months on the hydraulic motor.
• Manufactured in the USA
BRUSH WOLF ALPHA
We carry 2 models:
Alpha XP Flat Blade -
$19,147
Alpha HD Flat Blade - $19,147
• HD for standard flow (or High flow with lower GPM) skid steers with auxiliary hydraulic flows rated at 23-32 GPM
• XP for high flow skid steers rated at 33-45 GPM.
FEATURES:
• Consistent cutting of heavy brush – capacity to cut trees up to 10” in diameter!
• Hydraulic piston motor for quicker recovery time and less bogging down when accelerating through thick brush
• Massive bearing housing has a 3.25″ shaft diameter and patented locking retention system to provide maximum reliability in the toughest cutting situations.
• Proven blade carrier system provides the performance and inertia to tackle the most demanding jobs.
• Open front and “V-Notch” design allows operator precision when cutting trees and saplings.
• A deflector plate controls discharged material from the front of the deck
• A vented hood shields the drive train and hydraulic connections from impacts and debris.
• Laminated abrasion resistant “AR 400” skid pads provide extended life to the ground engaging skid rails.
• “Clean Deck” design allows material to glide off during operation preventing unwanted buildup of debris.
• Heavy duty spiral hose wrap guards hydraulic hoses to stave off entanglements of branches and keep you moving.
• Three year warranty on the structural steel and 18 months on the hydraulic motor.
• Manufactured in the USA
Brush Wolf 7201 Brush Mower
7201 LF (15-20 GPM) - $8,792
7201 STD (20-25 GPM) - $8,792
7201 HF (26-40 GPM) - $10,260
All the same Brush Wolf quality, performance and durability is in the design of our new 7201 Standard model. The open front design cuts vegetation before the frame pushes the material over. The suction and long-lasting high tempered steel blades will clip through brush and saplings up to 5″. The balanced stump jumper prevents vibration, and a welded collar on the bottom of the deck helps prevent damage to the gearbox seal. You’ll have exceptional performance because each Brush Wolf model has been engineered with the right motor and gearbox to optimize the full capacity of your operating equipment. Every detail has been engineered for durability and easy operation.
Each Brush Wolf model is paired with the correct hydraulic motor and right angle gear box to achieve the highest torque available from your equipment while maintaining a proven tip speed ideal for brush cutting applications. Power, performance and reliability are built-in. It is important to know the auxiliary hydraulic flow in gallons per minute, as well as the cutting diameter you’d prefer, which should be slightly wider than your loaders wheel base. We offer models that fit your machine – 15-20 GPM for our LF (low flow) model, 20-25 GPM for our STD (Standard Flow ) model, and 26-40 GPM for our HF (High Flow) model. You’ll find the right Brush Wolf model to make the most of your skid steers power with options available in: low flow, standard or high flow. You can count on Brush Wolf to handle your workload now and in the future. Three year warranty on the structural steel and 18 months on the hydraulic motor.
7201 STD (20-25 GPM) - $8,792
7201 HF (26-40 GPM) - $10,260
All the same Brush Wolf quality, performance and durability is in the design of our new 7201 Standard model. The open front design cuts vegetation before the frame pushes the material over. The suction and long-lasting high tempered steel blades will clip through brush and saplings up to 5″. The balanced stump jumper prevents vibration, and a welded collar on the bottom of the deck helps prevent damage to the gearbox seal. You’ll have exceptional performance because each Brush Wolf model has been engineered with the right motor and gearbox to optimize the full capacity of your operating equipment. Every detail has been engineered for durability and easy operation.
Each Brush Wolf model is paired with the correct hydraulic motor and right angle gear box to achieve the highest torque available from your equipment while maintaining a proven tip speed ideal for brush cutting applications. Power, performance and reliability are built-in. It is important to know the auxiliary hydraulic flow in gallons per minute, as well as the cutting diameter you’d prefer, which should be slightly wider than your loaders wheel base. We offer models that fit your machine – 15-20 GPM for our LF (low flow) model, 20-25 GPM for our STD (Standard Flow ) model, and 26-40 GPM for our HF (High Flow) model. You’ll find the right Brush Wolf model to make the most of your skid steers power with options available in: low flow, standard or high flow. You can count on Brush Wolf to handle your workload now and in the future. Three year warranty on the structural steel and 18 months on the hydraulic motor.
BrushWolf-72-HDO & XP/O
• 72” HD/O - $13,486
• 78” HD/O - $13,896
• 72” XP/O - $13,531
• 78” XP/O - $13,941
Introducing the New Open Front brush cutter from Cross-Tech Manufacturing.
• HD/O line rated at 23 to 29 GPM
• XP/O line rated at 30 to 40 GPM
• Designed for industrial and commercial applications.
• Consistently tackle heavy brush and trees up to 8 inches in diameter.
• Direct drive hydraulic piston motor
• Massive 1 inch 3 blade carrier is CNC balanced and true.
• Unmatched performance and reliability is unmatched.
• Abrasion resistant AR 400 skid
• 78” HD/O - $13,896
• 72” XP/O - $13,531
• 78” XP/O - $13,941
Introducing the New Open Front brush cutter from Cross-Tech Manufacturing.
• HD/O line rated at 23 to 29 GPM
• XP/O line rated at 30 to 40 GPM
• Designed for industrial and commercial applications.
• Consistently tackle heavy brush and trees up to 8 inches in diameter.
• Direct drive hydraulic piston motor
• Massive 1 inch 3 blade carrier is CNC balanced and true.
• Unmatched performance and reliability is unmatched.
• Abrasion resistant AR 400 skid
MBW Vibratory Roller
• MBW ATS73 73" Smooth Roller - $17,858
• MBW ATP73 73" Paddle Roller - $19,245
• MBW ATS84 84" Smooth Roller - $19,278
These rollers are the industry leaders in compaction, featuring:
• Hydraulically powered exciter systems lubricated by an oil mist design.
• Patented exciter shaft design that minimizes exciter shaft deflection, lower operating temperatures, and provide MBW attachments with the industry’s lowest incidence of bearing and seal failure.
• Knockdown blade is integral to the roller frame.
• Vibrating drums are isolated from the frame minimizing transmission of vibration to the host machine
• All models come with a universal quick attach system.
Stump Grinder
The Jenkins Iron & Steel heavy duty stump grinder with hydraulic swing and depth control. A 25″ diameter cutting wheel, will shear your stumps to dust. The carbide Greenteeth can be rotated 3 times before having to replace them.
Features:
Eaton Char-Lynn motor
Hydraulic swing and depth control
25″ diameter cutting wheel
Carbide Greenteeth (rotate 3 times before replacing)
Commercial 3/4″ HD disc
Hydraulically adjustable vertically and horizontally
Standard flow only, 14-25gpm
Specifications:
74″ total length
48″ arm length
28″ high
652 lbs
$5,750
Features:
Eaton Char-Lynn motor
Hydraulic swing and depth control
25″ diameter cutting wheel
Carbide Greenteeth (rotate 3 times before replacing)
Commercial 3/4″ HD disc
Hydraulically adjustable vertically and horizontally
Standard flow only, 14-25gpm
Specifications:
74″ total length
48″ arm length
28″ high
652 lbs
$5,750
Demo Dozer
Demo Dozer
Demo-Dozer combines the following attachments in one attachment:
-Material GP Bucket
-Dozer
-Demolition Grapple
-Clam Shell Bucket
-Log Handler
-Four in One Bucket
-Receiver Hitch attachment
72" - $6,300
84" - $6,550
Demo-Dozer combines the following attachments in one attachment:
-Material GP Bucket
-Dozer
-Demolition Grapple
-Clam Shell Bucket
-Log Handler
-Four in One Bucket
-Receiver Hitch attachment
72" - $6,300
84" - $6,550
Soil Conditioner
The Jenkins Iron and Steel Soil Conditioner is the ideal tool for all of your grading, shaping and leveling needs. Ideal for anyone from landscapers to food plotters, builders and contractors this is an invaluable tool to get the job done faster and better! Our conditioner features a direct drive Eaton Char-Lynn hydraulic motor that is both standard and high flow compatible! Our over 10″ drum spinner features carbide tips for ultimate wear and ripping ability. Our industry-leading 4×8″ heavy walled rectangular backbone can handle the extreme duty work you throw at it with ease. Featuring heavy duty caster wheels on an oscillating frame and free-floating mounting plate keeping level is a breeze! Like all Jenkins attachments, we have fully greaseable pivot points and wheel bearings for long life and easy maintenance! We also include bolt on wings for soil control and windrowing!
7' - $7,600
6' - $7,400
7' - $7,600
6' - $7,400
Hydra Bucket
Soil Conditioner and Bucket Combined!!!
The Hydra-Bucket is the most versatile skid steer bucket on the market. It works as an ultra-heavy-duty traditional bucket attachment, but also give you the option to grind, shred, and pulverize stumps, brush, dirt, and basically anything that gets in your way, on the fly. This is the only soil conditioner bucket combination on the market!
Features:
• Made with AR400, AR200, and Grade 50 material.
• 5" ball bearings that are triple sealed to protect from the elements.
• 2 cutting edges leading up to the drum to shred anything trying to get through.
• 6,700 in/lb Char-Lynn hydraulic motor housed inside the drum for ultimate protection.
• Ultra hard carbide cutter teeth on drum.
• Direct-drive and powerful motor - bidirectional
• Crossover relief valves to help dampen shock to the hydraulic system.
Prices:
• HB72 - 72" Hydra Bucket - $8,150
• HB78 - 78" Hydra Bucket - $8,300
• HB84 - 84" Hydra Bucket - $8,500
• MHB48 - 48" Mini Skid Steer Hydra Bucket - $5,400
The Hydra-Bucket is the most versatile skid steer bucket on the market. It works as an ultra-heavy-duty traditional bucket attachment, but also give you the option to grind, shred, and pulverize stumps, brush, dirt, and basically anything that gets in your way, on the fly. This is the only soil conditioner bucket combination on the market!
Features:
• Made with AR400, AR200, and Grade 50 material.
• 5" ball bearings that are triple sealed to protect from the elements.
• 2 cutting edges leading up to the drum to shred anything trying to get through.
• 6,700 in/lb Char-Lynn hydraulic motor housed inside the drum for ultimate protection.
• Ultra hard carbide cutter teeth on drum.
• Direct-drive and powerful motor - bidirectional
• Crossover relief valves to help dampen shock to the hydraulic system.
Prices:
• HB72 - 72" Hydra Bucket - $8,150
• HB78 - 78" Hydra Bucket - $8,300
• HB84 - 84" Hydra Bucket - $8,500
• MHB48 - 48" Mini Skid Steer Hydra Bucket - $5,400
DIGGA Trencher
The Digga Bigfoot Trencher allows selectable, consistent digging depths, efficient spoil removal, minimal ground disturbance and a clean job finish. The Bigfoot Trencher ideal for laying pipe, irrigation, underground power, or any other trenching needs. EATON MOTORS!
DIGGA MODELS/FEATURES :
BIGFOOT XD TRENCHER WITH 6" COMBINATION CHAIN
• 48" with 4 PRESET DEPTHS OF 24"/32"/40"/48"
• FLOW RATE 16 - 30 GPM
• $7,770 (skid steer)
MINI BIGFOOT TORO MOUNT TRENCHER WITH 6" COMBINATION CHAIN
• 36" with 4 PRESET DEPTHS OF 18"/24"/30"/36"
• FLOW RATE 10 - 25 GPM
• $4,730 (toro or common mini)
MINI BIGFOOT BOBCAT MOUNT TRENCHER WITH 6" COMBINATION CHAIN
• 36" with 4 PRESET DEPTHS OF 18"/24"/30"/36"
• FLOW RATE 10 - 25 GPM
• $5,235 (Bobcat mini)
DIGGA MODELS/FEATURES :
BIGFOOT XD TRENCHER WITH 6" COMBINATION CHAIN
• 48" with 4 PRESET DEPTHS OF 24"/32"/40"/48"
• FLOW RATE 16 - 30 GPM
• $7,770 (skid steer)
MINI BIGFOOT TORO MOUNT TRENCHER WITH 6" COMBINATION CHAIN
• 36" with 4 PRESET DEPTHS OF 18"/24"/30"/36"
• FLOW RATE 10 - 25 GPM
• $4,730 (toro or common mini)
MINI BIGFOOT BOBCAT MOUNT TRENCHER WITH 6" COMBINATION CHAIN
• 36" with 4 PRESET DEPTHS OF 18"/24"/30"/36"
• FLOW RATE 10 - 25 GPM
• $5,235 (Bobcat mini)
DIGGA cement mixer/auger
CEMENT MIXER AUGER DRIVE 3DSS & 4CU/FT MIXER
• MIXER CAN BE REMOVED AND USE AUGER DRIVE FOR DRILLING
• FLOW RATE 10 - 30 GPM
• $3,435
• MIXER CAN BE REMOVED AND USE AUGER DRIVE FOR DRILLING
• FLOW RATE 10 - 30 GPM
• $3,435
Backhoe
6.5' Backhoe with 18" bucket and thumb:
$2,850
6.5' Backhoe with 12" bucket and thumb:
$2,750
8.5' Backhoe with 18" bucket and thumb:
$2,975
$2,850
6.5' Backhoe with 12" bucket and thumb:
$2,750
8.5' Backhoe with 18" bucket and thumb:
$2,975
Belltec Auger
The Belltec LC-300 comes with skid steer attachment plate, hoses, and flat faced couplers to connect to your skid steer.
This auger drive works between 15-30 GPM and up to 3500 PSI. This auger is tried and tested, and comes with a 4 year limited manufacturer warranty!
We sell the auger drive only, a 9” and 12” dirt combo, a 9” rock big combo, and a 12” rock big combo.
Many other options for bits, extensions and accessories are available!
Prices :
Belltec LC300 auger drive - $2,600
Dirt Combo - drive and 9”&12” dirt bits - $3,200
9” Rock bit and auger drive - $3,700
12” Rock bit and auger drive - $3,900
This auger drive works between 15-30 GPM and up to 3500 PSI. This auger is tried and tested, and comes with a 4 year limited manufacturer warranty!
We sell the auger drive only, a 9” and 12” dirt combo, a 9” rock big combo, and a 12” rock big combo.
Many other options for bits, extensions and accessories are available!
Prices :
Belltec LC300 auger drive - $2,600
Dirt Combo - drive and 9”&12” dirt bits - $3,200
9” Rock bit and auger drive - $3,700
12” Rock bit and auger drive - $3,900
Land Leveler
Bolt on, reversible, AR400, Abrasion Resistant Steel cutting edge with tooth profile on the front and rear for forward and reverse grading.
Removable screen trays sift rocks and other debris from the soil
Hydraulic scarifying teeth to cut high spots and loosen hard ground
Adjustable scarifier teeth are 3/4″ thick AR400 steel and can be set to 3”, 4.5” or 6” depth.
Includes hoses and high quality flat faced coupler
Tough, powder coat finish
5 year structural warranty
84" w/hose saver - $4,050
72" w/hose saver - $3,570
Removable screen trays sift rocks and other debris from the soil
Hydraulic scarifying teeth to cut high spots and loosen hard ground
Adjustable scarifier teeth are 3/4″ thick AR400 steel and can be set to 3”, 4.5” or 6” depth.
Includes hoses and high quality flat faced coupler
Tough, powder coat finish
5 year structural warranty
84" w/hose saver - $4,050
72" w/hose saver - $3,570
Dominator Tree Puller w/guard
60” opening easily grasps large objects.
Jaws are 1” thick AR400 high strength steel.
AR400 steel root rippers are removable
3/4” thick vertical jaw braces
3/4” thick upper and lower frame plates
4″x4″x3/8“ frame cross tubes.
Twin 3.5”x8” cross tube welded cylinders
Each cylinder can produce over 33,000 pounds of force
Hydraulic cylinder guards built from 3/8” plate protects cylinders when digging or pulling.
2” diameter, CF 1045 main pivot pins
Greasable at all pivot points
Abrasive blasted and powdered coated.
Dig with jaws open or closed.
Includes 4780 PSI hoses and flat faced couplers
Mounts are available for most loaders
Tree Puller w/guard and hose saver - $5,050
Jaws are 1” thick AR400 high strength steel.
AR400 steel root rippers are removable
3/4” thick vertical jaw braces
3/4” thick upper and lower frame plates
4″x4″x3/8“ frame cross tubes.
Twin 3.5”x8” cross tube welded cylinders
Each cylinder can produce over 33,000 pounds of force
Hydraulic cylinder guards built from 3/8” plate protects cylinders when digging or pulling.
2” diameter, CF 1045 main pivot pins
Greasable at all pivot points
Abrasive blasted and powdered coated.
Dig with jaws open or closed.
Includes 4780 PSI hoses and flat faced couplers
Mounts are available for most loaders
Tree Puller w/guard and hose saver - $5,050
Montana Post Driver 750R-Rancher
Commercial Quality for Farmers & Ranchers
Our smallest post driver, the 750R Rancher enables farmers and ranchers to efficiently build their own fences using any medium-sized skid steer. It will drive pipe or a 6” post into almost any soil condition. The 750R may be our smallest model, but you get the same durability, low-maintenance, and quality as our larger models. Like all of our post drivers, it comes with a one year warranty.
Energy Class: 750 ft.-lb.
Weight of Post Driver with skid steer mount: 1380 lbs.
Min. Skid Steer Lifting Capacity: 1500 lbs.
Weight of Post Driver with excavator mount: 800 lbs.
Required Excavator Size: 8,000-14,000 lbs.
Oil Flow (GMP): 11-18 gpm
Working Pressure: 2000 PSI
Chisel Shaft Diameter: 2.7”
Blow Rate (Blows per min.): 500-900
Domed Cup Inside Diameter: 7” ID
Thickness of Steel Plate Frame: ¾”
Comes with: tool box, nitrogen charge kit and filled nitrogen bottle
1 Year Warranty
Price: $6,800 – Includes skid steer mount.
Our smallest post driver, the 750R Rancher enables farmers and ranchers to efficiently build their own fences using any medium-sized skid steer. It will drive pipe or a 6” post into almost any soil condition. The 750R may be our smallest model, but you get the same durability, low-maintenance, and quality as our larger models. Like all of our post drivers, it comes with a one year warranty.
Energy Class: 750 ft.-lb.
Weight of Post Driver with skid steer mount: 1380 lbs.
Min. Skid Steer Lifting Capacity: 1500 lbs.
Weight of Post Driver with excavator mount: 800 lbs.
Required Excavator Size: 8,000-14,000 lbs.
Oil Flow (GMP): 11-18 gpm
Working Pressure: 2000 PSI
Chisel Shaft Diameter: 2.7”
Blow Rate (Blows per min.): 500-900
Domed Cup Inside Diameter: 7” ID
Thickness of Steel Plate Frame: ¾”
Comes with: tool box, nitrogen charge kit and filled nitrogen bottle
1 Year Warranty
Price: $6,800 – Includes skid steer mount.
Montana Breaker
Montana Hydraulic Breaker:
MB750 - $6,800
MB1000 - $8,000
MB750 - $6,800
MB1000 - $8,000
Montana Post Driver 1500E
Want to drive railroad ties? Here you go!
The 1500E, our heavy-weight post driver, is perfect for larger posts or rockier ground, with a working pressure of 2,300 PSI. It weighs 2,300 lbs., requiring a 3,000 pound lifting-capacity skid steer. It comes with a standard one year warranty and is available with a skid steer mount.
Energy Class: 1500 ft-lb.
Weight of Post Driver with skid steer mount: 2300 lbs.
Min. Skid Steer Lifting Capacity: 3000 lbs.
Weight of Post Driver with excavator mount: 1200 lbs.
Required Excavator Size: 14,000-28,000 lbs.
Oil Flow (GMP): 16-27 gpm
Working Pressure: 2300 PSI
Chisel Shaft Diameter: 3.35”
Blow Rate (Blows per min.): 400-800
Domed Cup Diameter: 9” ID
Thickness of Steel Plate Frame: ¾”
Comes with: tool box, nitrogen charge kit and filled nitrogen bottle
1 Year Warranty
Price: $11,500 – Includes skid steer mount.
Price include extra tools: flat post driving tool, concrete point, rock spike
Optional: 12″ railroad tie driving tool for $750
The 1500E, our heavy-weight post driver, is perfect for larger posts or rockier ground, with a working pressure of 2,300 PSI. It weighs 2,300 lbs., requiring a 3,000 pound lifting-capacity skid steer. It comes with a standard one year warranty and is available with a skid steer mount.
Energy Class: 1500 ft-lb.
Weight of Post Driver with skid steer mount: 2300 lbs.
Min. Skid Steer Lifting Capacity: 3000 lbs.
Weight of Post Driver with excavator mount: 1200 lbs.
Required Excavator Size: 14,000-28,000 lbs.
Oil Flow (GMP): 16-27 gpm
Working Pressure: 2300 PSI
Chisel Shaft Diameter: 3.35”
Blow Rate (Blows per min.): 400-800
Domed Cup Diameter: 9” ID
Thickness of Steel Plate Frame: ¾”
Comes with: tool box, nitrogen charge kit and filled nitrogen bottle
1 Year Warranty
Price: $11,500 – Includes skid steer mount.
Price include extra tools: flat post driving tool, concrete point, rock spike
Optional: 12″ railroad tie driving tool for $750
Montana Post Driver 1000E
Montana’s mid-sized hydraulic post driver is the 1000E model with a working pressure of 2200 PSI delivering 400-800 blows per minute. It weighs 2000 lbs., requiring a lifting-capacity of 2500 pounds or more. The skid steer mount includes a convenient rack for transporting posts. To drill pilot holes in hard or stony ground, add the optional auger attachment. We always keep parts in stock at Montana Post Driver in addition to offering a one year warranty!
Energy Class: 1150 ft-lb.
Weight of Post Driver with skid steer mount: 2000 lbs.
Min. Skid Steer Lifting Capacity: 2500 lbs.
Weight of Post Driver with excavator mount: 900 lbs.
Required Excavator Size: 12,000-18,000 lbs.
Oil Flow (GMP): 13-24 gpm
Working Pressure: 2200 PSI
Chisel Shaft Diameter: 3”
Blow Rate (Blows per min.): 400-800
Domed Cup Diameter: 8” ID
Thickness of Steel Plate Frame: ¾”
Comes with: tool box, nitrogen charge kit and filled nitrogen bottle
1 Year Warranty
Price: $9,100 USD – Includes skid steer mount.
Price includes these extra tools: flat post driving tool, concrete point, rock spike
Energy Class: 1150 ft-lb.
Weight of Post Driver with skid steer mount: 2000 lbs.
Min. Skid Steer Lifting Capacity: 2500 lbs.
Weight of Post Driver with excavator mount: 900 lbs.
Required Excavator Size: 12,000-18,000 lbs.
Oil Flow (GMP): 13-24 gpm
Working Pressure: 2200 PSI
Chisel Shaft Diameter: 3”
Blow Rate (Blows per min.): 400-800
Domed Cup Diameter: 8” ID
Thickness of Steel Plate Frame: ¾”
Comes with: tool box, nitrogen charge kit and filled nitrogen bottle
1 Year Warranty
Price: $9,100 USD – Includes skid steer mount.
Price includes these extra tools: flat post driving tool, concrete point, rock spike
Montana Post Driver T-REX350
Convenient attachment for driving pipe and T-posts
Built with the same quality as the other Montana Post Drivers. The T-Rex is ideal for oil field pipe, t-posts, tent stakes, chain link posts and more. Available as fork attachment as well. Transport your T-posts with you in the optional cradle that slides on skidsteer forks.
Key Features:
Energy class: 350 ft. lbs.
Oil Flow: 5-10 gpm
Working pressure: 1300-1500 psi.
Blows per minute: 700-1200
Driving Cup Diameter: 3 1/2″ ID
Domed head eliminates need for tilt
Single Lubrication Point
Unit Weight: 200 lbs.
Price: $2,750
Built with the same quality as the other Montana Post Drivers. The T-Rex is ideal for oil field pipe, t-posts, tent stakes, chain link posts and more. Available as fork attachment as well. Transport your T-posts with you in the optional cradle that slides on skidsteer forks.
Key Features:
Energy class: 350 ft. lbs.
Oil Flow: 5-10 gpm
Working pressure: 1300-1500 psi.
Blows per minute: 700-1200
Driving Cup Diameter: 3 1/2″ ID
Domed head eliminates need for tilt
Single Lubrication Point
Unit Weight: 200 lbs.
Price: $2,750
DoMor Hydraulic Adjusting Grader
• Patented blade adjustment system allows you to easily change your blade angle without ever leaving the seat of your skid steer
• Patent pending 4-blade design gives you the versatility to work in both directions
• Rugged 1/4" thick tube steel design and 13⁄4" reversible skid shoes ensure years of dependable service
• High carbon cutting edges: Every Dura-Grader is equipped with the same cutting edges that are used on commercial motor graders
• Universal quick attach
• Ideal skid steer attachment for construction sites, landscaping, ranches, and road maintenance
• Engineered to allow material to pass over the high carbon cutting edges causing material to continually mix together while smoothing dirt or gravel and removing any growing organic material
• 72" - $5,675 (60HP Req)
• 84" - $5,975 (70 HP Req)
• Patent pending 4-blade design gives you the versatility to work in both directions
• Rugged 1/4" thick tube steel design and 13⁄4" reversible skid shoes ensure years of dependable service
• High carbon cutting edges: Every Dura-Grader is equipped with the same cutting edges that are used on commercial motor graders
• Universal quick attach
• Ideal skid steer attachment for construction sites, landscaping, ranches, and road maintenance
• Engineered to allow material to pass over the high carbon cutting edges causing material to continually mix together while smoothing dirt or gravel and removing any growing organic material
• 72" - $5,675 (60HP Req)
• 84" - $5,975 (70 HP Req)
DoMor Manual Adjusting Grader
• Changing the blade angle to meet your need is as easy as removing two bolts
• Patent pending 4-blade design gives you the versatility to work in both directions
• Rugged 1/4" thick tube steel design and 13⁄4" reversible skid shoes ensure years of dependable service
• High carbon cutting edges: Every Dura-Grader is equipped with the same cutting edges that are used on commercial motor graders
• Universal quick attach mount
• Ideal skid steer attachment for construction sites, landscaping, ranches, and road maintenance
• Engineered to allow material to pass over the high carbon cutting edges causing material to continually mix together while smoothing dirt or gravel and removing any growing organic material
• 72" $4,775 (60HP Req)
• 84" $5,075 (70HP Req)
• Patent pending 4-blade design gives you the versatility to work in both directions
• Rugged 1/4" thick tube steel design and 13⁄4" reversible skid shoes ensure years of dependable service
• High carbon cutting edges: Every Dura-Grader is equipped with the same cutting edges that are used on commercial motor graders
• Universal quick attach mount
• Ideal skid steer attachment for construction sites, landscaping, ranches, and road maintenance
• Engineered to allow material to pass over the high carbon cutting edges causing material to continually mix together while smoothing dirt or gravel and removing any growing organic material
• 72" $4,775 (60HP Req)
• 84" $5,075 (70HP Req)
Skid Steer Fixed Dura-Grader
• 4-blade design allows you to work in both directions.
• 1/4” thick tube steel design and 13⁄4” reversible skid shoes
• High carbon cutting edges
• Universal quick attach mount
• Ideal for construction sites, landscaping, ranches, and road maintenance
• Engineered to allow material to pass over the high carbon cutting edges causing material to continually mix together while smoothing dirt or gravel and removing any growing organic material
• 72" - $4,375 (50HP Req)
• 84" - $4,675 (60HP Req)
• 1/4” thick tube steel design and 13⁄4” reversible skid shoes
• High carbon cutting edges
• Universal quick attach mount
• Ideal for construction sites, landscaping, ranches, and road maintenance
• Engineered to allow material to pass over the high carbon cutting edges causing material to continually mix together while smoothing dirt or gravel and removing any growing organic material
• 72" - $4,375 (50HP Req)
• 84" - $4,675 (60HP Req)
DoMor 3-Blade Grader
• Three cutting edges allows the operator to push or pull material, reducing work time while delivering superior results
• Welded seam construction with a 4" tubular steel frame and replaceable 1/2" skid runners for long life
• Low profile design allows optimal visibility while grading and spreading material in tight areas
• Engineered to allow material to pass over the high carbon cutting edges causing material to continually mix together while smoothing dirt or gravel and removing any growing organic material
• Ideal attachment for fine and rough grading, land leveling, brush and waste clearing, material spreading, and backfilling
• Weld on bucket stops to easily transport both grader and bucket
• 72" - $2,945 (30 HP Req)
• 84" - $3,245 (40 HP Req)
• Welded seam construction with a 4" tubular steel frame and replaceable 1/2" skid runners for long life
• Low profile design allows optimal visibility while grading and spreading material in tight areas
• Engineered to allow material to pass over the high carbon cutting edges causing material to continually mix together while smoothing dirt or gravel and removing any growing organic material
• Ideal attachment for fine and rough grading, land leveling, brush and waste clearing, material spreading, and backfilling
• Weld on bucket stops to easily transport both grader and bucket
• 72" - $2,945 (30 HP Req)
• 84" - $3,245 (40 HP Req)
4 in 1 Combo Bucket
Used for dozing, land leveling, grappling, dumping, etc. 2 reversible, replaceable 3/4" cutting edges
78" - $4,150
78" - $4,150
bottom of page